YOKOGAWA WT210 Скачать руководство пользователя страница 115

Страница: 115 / 316

6-5

IM 760401-01E

Integration

Explanation

Selecting the Integration Mode

The following selections are available. The initial value is nor.

• nor: Select this for manual or standard integration mode. Depending on the

integration timer, this instrument will automatically decide the appropriate mode.

• Cont: Select this for the continuous integration mode.

Setting the Integration Timer

Set the integration time. The setting ranges from 0.00.00 (0 hrs, 00 min, 00 s) to

10000.00.00 (10000 hrs, 00 min, 00 s). The initial value is 0.00.00.

• 0.00.00: When “nor” is selected on the integration menu, the manual integration

mode will become valid. If Cont is selected, an error code is displayed when

integration is started, and the integration is not performed.s

• 0.00.01 to 10000.00.00: The time during which integration will be performed when

in the standard or continuous integration mode. The standard or continuous mode

should be selected at the integration mode menu.

6.2 Setting Integration Mode and Integration Timer

Содержание WT210





























































































































































































































































































































Результаты поиска

Содержание WT210

Отзывы:

YOKOGAWA WT210, Руководство пользователя, Страница: 115 / 316

Результаты поиска

Содержание WT210

Отзывы: