YOKOGAWA WT1800E Скачать руководство пользователя страница 68

Страница: 68 / 154

8-5

IM WT18O1E-02EN

8.3 Starting, Stopping, and Resetting Integration

This section explains how to start, stop, and reset integration.

►

“Starting, Stopping, and Resetting Integration (Start/Stop/Reset)” in the features guide

Integ Menu

Press

INTEG

to display the following menu.

Starts integration

This instrument starts integration using the integration mode that you have specified (see

section 8.2).

• The START indicator to the right of the INTEG key illuminates.

Integration has started; “Integ: Start” is displayed.

• The START indicator to the right of the INTEG key blinks.

The integration operation is ready; “Integ: Ready” is displayed.

Stops integration

This instrument automatically stops integration according to the integration mode that you have

specified. To force integration to stop, press this soft key. The integration time and integrated

value are held.

• The STOP indicator to the right of the INTEG key blinks.

Integration has stopped; “Integ: Stop” is displayed.

If you press the Start soft key when “Stop” is displayed in yellow, you can resume integration

from the point where you stopped integration.

• The STOP indicator to the right of the INTEG key illuminates.

Integration has stopped automatically because the integration timer has expired; “Integ:

TimeUp” is displayed.

Integration has stopped automatically because of real-time control; “Integ: Stop” is

displayed.

“Stop” is displayed in orange.

Resets the integration time and integrated value.

All integration data is deleted, and the no-data display, “-------,” appears.

The STOP indicator to the right of the INTEG key turns off.

* Character strings are displayed in the upper-right section of the screen.

Note

If you do not reset integration, you will not be able to start it again.

Содержание WT1800E



























































































































































Результаты поиска

Содержание WT1800E

Отзывы:

YOKOGAWA WT1800E, Руководство пользователя, Страница: 68 / 154

Результаты поиска

Содержание WT1800E

Отзывы: