YOKOGAWA WT1800E Скачать руководство пользователя страница 140 | Manualshive

Страница: 140 / 154

YOKOGAWA WT1800E Скачать руководство пользователя страница 140

21-6

IM WT18O1E-02EN

21.6 Configuring D/A Output Items (Option)

This section explains the following settings for D/A output. This feature is available on models with the
/DA option.
•  Measurement function
•  Element and wiring unit
•  Harmonic order
•  D/A output range
  Range mode, range maximum, and range minimum

►

“D/A Output (D/A Output Items; option)” in the features guide

Configuring D/A Output Items

Press

UTILITY

and then the

D/A Output Items

soft key to display the following screen.

Set the element and wiring unit (Element 1 to Element 6, ΣA to ΣC).

Set the measurement function

(None, other functions—for details on the various measurement functions, see

“Items That This Instrument Can Measure” in the features guide).

Output item

This display changes according to the Function, Element/Σ, and Order settings.

Set the harmonic order (Total, 0 to 500; /G5 or /G6 option).

You can set this setting when the measurement function includes a

harmonic order.

Select the mode of the D/A

output range (Fix, Manual).

Set the maximum and minimum

values of the range

(–9.999 T to 9.999 T).

These settings can be set when

Range Mode is set to Manual.

D/A output signal name

For details on the connector pinout and the D/A output signal assignment, see section 4.6 in the

getting started guide, IM WT1801E-03EN.

«
...
138
139
140
141
142
...
»

Содержание WT1800E



























































































































































Отзывы:

Нет отзывов