YOKOGAWA WT1800E Скачать руководство пользователя страница 119 | Manualshive

Страница: 119 / 154

YOKOGAWA WT1800E Скачать руководство пользователя страница 119

19-2

IM WT18O1E-02EN

19.1 Loading Roll Paper into the Built-In Printer (Option)

Loading the Roll Paper

WARNING

A roll paper cutter is present inside the printer unit cover. Be careful of the cutter so as to
avoid injuring your fingers or hands.
• Do not insert your fingers into the opening on the printer unit (the roll paper ejection hole).
• When you have opened the printer unit cover to place roll paper in the holder, avoid

touching the cutter with your fingers and hands.

Do not touch the print head and print motor. If you do, you may burn yourself.

French

AVERTISSEMENT

Un dispositif de coupe de papier en rouleau est fixé sur le couvercle de l’imprimante. Prendre
garde de se blesser les mains ou les doigts avec le dispositif de coupe.
• Ne pas insérer de doigt dans l’ouverture de sortie du papier en rouleau de l’imprimante.
• Ne pas laisser une main ou des doigts entrer en contact avec le dispositif de coupe lors

de l’ouverture du couvercle de l’imprimante et de la charge du papier en rouleau dans son
logement.

Ne touchez pas la tête d’impression ni le moteur d’impression. Vous pourriez vous brûler.

1.

Slide the lever to the right to make the printer unit
protrude from this instrument.

3.

Hold the top, bottom, and right side of the printer
unit, and then pull it toward you until it stops (pull
the unit approximately 5 cm).

4.

Hold the left and right sides of the printer unit’s
tray with your hands, and push the right and left
sides of the front of the cover with your thumbs to
raise it.

2.

Insert your finger into the groove on the right side
of the printer unit.

Lever

Printer unit

Groove

Hold the top, bottom, and

right side of the printer unit.

Hold the cover as indicated in the

figure, and push the cover up.

Cover

Tray

«
...
117
118
119
120
121
...
»

Содержание WT1800E



























































































































































Отзывы:

Нет отзывов