manualshive.com logo in svg

YOKOGAWA WT1600FC, Руководство пользователя, Страница: 73 / 163

Поделиться
Скачать
YOKOGAWA WT1600FC Скачать руководство пользователя страница 73

5-37

IM 760151-17E

Commands

5

:HCOPy:SAVE:NAME

Function

Sets the name of the file to be saved or queries

the current setting.

Syntax

:HCOPy:SAVE:NAME {<Filename>}

:HCOPy:SAVE:NAME?

Example

:HCOPY:SAVE:NAME "DATA1"

:HCOPY:SAVE:NAME? ->

:HCOPY:SAVE:NAME "DATA1"

Description • The save destination of the screen data is

specified using:

• the “

:FILE:DRIVe

” command for the

drive.

• the “

:FILE:CDIRectory

” command for

the directory.  The save destination path

can be queried using the “

:FILE:PATH?

”

command.

• Specify the file name without the extension.

:HCOPy:TIFF?

Function

Queries all settings related to the TIFF format.

Syntax

:HCOPy:TIFF?

Example

:HCOPY:TIFF? -> :HCOPY:TIFF:

COLOR COLOR

:HCOPy:TIFF:COLor

Function

Sets the color tone for the TIFF format or

queries the current setting.

Syntax

:HCOPy:TIFF:COLor {OFF|COLor|

REVerse}

:HCOPy:TIFF:COLor?

Example

:HCOPY:TIFF:COLOR COLOR

:HCOPY:TIFF:COLOR? -> :HCOPY:TIFF:

COLOR COLOR

5.7

HOLD Group

The commands in this group deal with the hold function of output data.

You can make the same settings and inquiries as when HOLD on the front panel is used.

:HOLD

<Space>

OFF

ON

<NRf>

?

:HOLD

Function

Sets the output data (display, communications,

etc.) hold or queries the current setting.

Syntax

:HOLD {<Boolean>}

:HOLD?

Example

:HOLD OFF

:HOLD? -> :HOLD 0

5.6  HCOPy Group/5.7  HOLD Group

Содержание WT1600FC




































































































































































Отзывы:

Нет отзывов