YOKOGAWA WT1600FC Скачать руководство пользователя страница 57

Страница: 57 / 163

5-21

IM 760151-17E

Commands

:DISPlay?

Function

Queries all settings related to the screen

display.

Syntax

:DISPlay?

Example

• Example in which the display format

(

:DISPlay:FORMat

) is set to “

NWAVe

”

:DISPLAY? -> :DISPLAY:

FORMAT NWAVE;

(Response to

“

:DISPlay:NUMeric?

” with the first

“

:DISPLAY:

” section removed)

;

(the

response to “

:DISPlay:WAVE?

”)

:DISPlay:FORMat

Function

Sets the display format or queries the current

setting.

Syntax

:DISPlay:FORMat {NUMeric|WAVE|

TRENd|NWAVe|NTRend|WTRend}

:DISPlay:FORMat?

NUMeric = Displays only the numeric values.

WAVE = Displays only the waveforms.

TRENd = Trend

NWAVe = Displays both the numeric values and

the waveforms.

NTrend = Displays both the numeric values and

the trends.

WTRend = Displays both the waveforms and

the trends.

Example

:DISPLAY:FORMAT NUMERIC

:DISPLAY:FORMAT? -> :DISPLAY:

FORMAT NUMERIC

Description • This command is valid only during power

measurement. A dedicated impedance

measurement display is shown during

impedance measurement, regardless of this

setting.

• This command is invalid on models that are

only equipped with impedance measurement

elements, since the mode is fixed to

impedance measurement.

:DISPlay:NUMeric?

Function

Queries all settings related to the numeric

display.

Syntax

:DISPlay:NUMeric?

Example

• During power measurement

(

:IMPedance[:STATe]

is set to “OFF(0)”)

:DISPLAY:NUMERIC? ->

(same as the

response to “

:DISPlay

[:NUMeric]:NORMal?

”)

• During impedance measurement

(

:IMPedance[:STATe]

is set to “ON(1)”)

:DISPLAY:NUMERIC? ->

(same as the

response to “

:DISPlay

[:NUMeric]:IMPedance?

”)

Description • This command is valid only during power

measurement. A dedicated impedance

measurement display is shown during

impedance measurement, regardless of this

setting.

• This command is invalid on models that are

only equipped with impedance measurement

elements, since the mode is fixed to

impedance measurement.

:DISPlay[:NUMeric]:IMPedance?

Function

Queries all settings related to the numeric

display for impedance measurement.

Syntax

:DISPlay[:NUMeric]:IMPedance?

Example

:DISPLAY:NUMERIC:IMPEDANCE? ->

:DISPLAY:NUMERIC:IMPEDANCE:

TYPE ZR_ZI;OBJECT 5;ICURSOR 1

:DISPlay[:NUMeric]:IMPedance:ICURsor

Function

Sets the cursor position on the numeric display

for impedance measurement or queries the

current setting.

Syntax

:DISPlay[:NUMeric]:IMPedance:

ICURsor {<NRf>}

:DISPlay[:NUMeric]:IMPedance:

ICURsor?

<NRf>

= 1 to 100

Example

:DISPLAY:NUMERIC:IMPEDANCE:

ICURSOR 1

:DISPLAY:NUMERIC:IMPEDANCE:

ICURSOR? -> :DISPLAY:NUMERIC:

IMPEDANCE:ICURSOR 1

Description Specify the cursor position in terms of the item

number.

:DISPlay[:NUMeric]:IMPedance:OBJect

Function

Sets the numeric display element for impedance

measurement or queries the current setting.

Syntax

:DISPlay[:NUMeric]:IMPedance:

OBJect {<NRf>}

:DISPlay[:NUMeric]:IMPedance:

OBJect?

<NRf>

= 1 to 5 (impedance measurement

element)

Example

:DISPLAY:NUMERIC:IMPEDANCE:OBJECT 5

:DISPLAY:NUMERIC:IMPEDANCE:OBJECT?

-> :DISPLAY:NUMERIC:IMPEDANCE:

OBJECT 5

5.4 DISPlay Group

Содержание WT1600FC




































































































































































Результаты поиска

Содержание WT1600FC

Отзывы:

YOKOGAWA WT1600FC, Руководство пользователя, Страница: 57 / 163

Результаты поиска

Содержание WT1600FC

Отзывы: