YOKOGAWA WT1600FC Скачать руководство пользователя страница 37

Страница: 37 / 163

Commands

5-1

IM 760151-17E

Chapter 5 Commands

5.1

Command List

Command

Function

Page

COMMunicate Group

:COMMunicate?

Queries all settings related to communications.

5-12

:COMMunicate:HEADer

Sets whether or not to be added a header to the response to a query or

queries the current setting.

5-12

:COMMunicate:LOCKout

Sets or clears local lockout.

5-12

:COMMunicate:OPSE

Sets the overlap command that is to be used by the

*OPC

*OPC?

, and

*WAI

commands or queries the current setting.

5-13

:COMMunicate:OPSR?

Queries the operation pending status register.

5-13

:COMMunicate:OVERlap

Sets the commands that will operate as overlap commands or queries the

current setting.

5-13

:COMMunicate:REMote

Sets remote or local.

5-13

:COMMunicate:STATus?

Queries line-specific status.

5-13

:COMMunicate:VERBose

Sets the response messages to full form or abbreviated form or queries

the current setting.

5-13

:COMMunicate:WAIT

Waits for a specified extended event.

5-13

:COMMunicate:WAIT?

Creates the response that is returned when the specified event occurs.

5-14

CURSor Group

:CURSor?

Queries all settings related to the cursor measurement.

5-16

:CURSor:TRENd?

Queries all settings related to the cursor measurement on the trend.

5-16

:CURSor:TRENd:POSition<x>

Sets the cursor position on the trend or queries the current setting.

5-16

:CURSor:TRENd[:STATe]

Turns ON/OFF the cursor display on the trend or queries the current setting. 5-16

:CURSor:TRENd:TRACe<x>

Sets the cursor target on the trend or queries the current setting.

5-16

:CURSor:TRENd:{X<x>|Y<x>|DY}?

Queries the cursor measurement value on the trend.

5-16

:CURSor:WAVE?

Queries all settings related to the cursor measurement on the waveform display.

5-16

:CURSor:WAVE:PATH

Sets the cursor path on the waveform display or queries the current setting.

5-16

:CURSor:WAVE:POSition<x>

Sets the cursor position on the waveform display or queries the current setting.

5-16

:CURSor:WAVE[:STATe]

Turns ON/OFF the cursor display on the waveform display or queries the

current setting.

5-17

:CURSor:WAVE:TRACe<x>

Sets the cursor target on the waveform display or queries the current setting. 5-17

:CURSor:WAVE:{X<x>|DX|PERDt|Y<x>|DY}?

Queries the cursor measurement value on the waveform display.

5-17

DISPlay Group

:DISPlay?

Queries all settings related to the screen display.

5-21

:DISPlay:FORMat

Sets the display format or queries the current setting.

5-21

:DISPlay:NUMeric?

Queries all settings related to the numeric display.

5-21

:DISPlay[:NUMeric]:IMPedance?

Queries all settings related to the numeric display for impedance measurement.

5-21

:DISPlay[:NUMeric]:IMPedance:ICURsor

Sets the cursor position on the numeric display for impedance

measurement or queries the current setting.

5-21

:DISPlay[:NUMeric]:IMPedance:OBJect

Sets the numeric display element for impedance measurement or

queries the current setting.

5-21

:DISPlay[:NUMeric]:IMPedance:TYPE

Sets the numeric display item for impedance measurement or queries

the current setting.

5-22

:DISPlay[:NUMeric]:NORMal?

Queries all settings related to the numeric display for power measurement.

5-22

:DISPlay[:NUMeric]:NORMal:FCURsor

Sets the cursor position on the numeric display (all display) for power

measurement or queries the current setting.

5-22

Содержание WT1600FC




































































































































































Результаты поиска

Содержание WT1600FC

Отзывы:

YOKOGAWA WT1600FC, Руководство пользователя, Страница: 37 / 163

Результаты поиска

Содержание WT1600FC

Отзывы: