YOKOGAWA WN100, Руководство пользователя

Страница: 8 / 60

<2. Notes on Handling>
2-1
IM 01W07D01-01EN
2. Notes on Handling
The WN100 is fully factory-tested before shipment.
When the WN100 delivered, check the appearance
for damage, and also check that the items shown
in Figure 2.1 and Table 2.1 are included with your
shipment. If anything is missing contact your
Yokogawa personnel.
All-weather
protector
F0201.ai
Antenna
WN100
main unit
Tag
plate
C
G
D
E
Antivibration
stage
Battery case
Terminal
cover
A
F
B
Figure 2.1 WN100 Mounting Hardware
Table 2.1 WN100 Mounting Hardware
Label Item Qty
A Screws for Functional grounding terminal 2
B Bracket 1
C Bolts for fastening bracket 4
D Spring washers for fastening bracket 4
E Nuts for fastening bracket 4
F U-bolt 1
G Nuts for U-bolt 2
2.1 Check the Model Name and
Configuration
The model name and configuration are indicated
on the nameplate. Verify that the configuration
indicated on the nameplate is identical to the
configuration printed on the order sheet. Refer to
“Model and Suffix Codes” in subsection 10.2 for
suffix code and its description.
Language code “EN” of the document number of
User’s Manual is omitted on the Name plate.
F0202.ai
Figure 2.2 Nameplate
2.2 Transport
To prevent damage while in transit, leave the
WN100 in the original shipping container until it
reaches the installation site. For transportation
of batteries, refer to subsection 8.4.3 “Handling
Batteries”.