manualshive.com logo in svg

YOKOGAWA WE7281, Руководство пользователя, Страница: 41 / 52

Поделиться
Скачать
YOKOGAWA WE7281 Скачать руководство пользователя страница 41

3-16

IM 707281-01E

3.5

Turning ON/OFF the Output

In this section, you will be using the operation panel which is shown in the figure below

and that appears by double-clicking the module icon in the station list window.

When the output is turned ON
the color turns from gray to green

Turn ON/OFF output

Output ON

When the [Output] button is clicked, the black & white colors of the [Output] button are

inverted, the “O” mark to the left of the button turns from gray to green, and the

waveform output is enabled.  In addition, the START indicator on the front panel of the

module turns ON.

Output OFF

When the [Output] button is clicked when a waveform is being generated, the black &

white colors of the [Output] button return to their original colors, the “O” mark to the left of

the button turns from green to gray, and the waveform output is aborted.  In addition, the

START indicator on the front panel of the module turns OFF.

Note

When the output is OFF, the waveform output terminal of the module outputs 0 V.

Содержание WE7281





















































Отзывы:

Нет отзывов