manualshive.com logo in svg

YOKOGAWA WE7281, Руководство пользователя, Страница: 11 / 52

Поделиться
Скачать
YOKOGAWA WE7281 Скачать руководство пользователя страница 11

1-5

IM 707281-01E

1

Explanation of Functions

1.5

Waveform Generation in the AG Mode

Setting the Output Conditions

You can turn ON/OFF the output and set the output voltage range for each channel.

Setting the output voltage range

You can select the range from the following list of choices.

Setting

Possible Output Range

1 V

–1 to 1 V

2 V

–2 to 2 V

5 V

–5 to 5 V

10 V

–10 to 10 V

Selecting the time base

You can select the time base from internal or external clock.  The sampling interval can

be specified only when internal clock is selected.

Setting the sampling interval

Set the interval that is used to read the waveform data from the waveform memory.

When auto load is used to load waveform data, the sampling interval setting is also

loaded.  However, the sampling interval can be changed after the waveform data are

loaded.  The range is 10 

µ

s to 10 s (10 

µ

s resolution).  This setting is valid only when the

time base setting is [Internal].

Setting memory partitions

The waveform data memory can be divided into multiple blocks.  The data that are

registered in each memory block can be output sequentially every time the trigger

occurs.  You can select the number of partitions from 1, 2, 4, 8, 16, 32, 64, 128, and 256.

When auto load is used to load waveform data, the number of partitions is set to the

number of blocks of the waveform data being loaded.

Setting the data length

You can specify the data length of the waveform to be generated.  The range is from 10

to the maximum usable data length.  When auto load is used to load waveform data, the

data length is set to that of the waveform data being loaded.

Setting the block to be output

You can specify the starting and ending blocks that are to be output the waveform from

the divided waveform memory.  The operation varies depending on the output mode (see

next section) as follows.

One Shot/Cont/Repeat : Outputs the waveform of the block specified by the [Start Block

No.].

Trigger

: Sequentially outputs the waveform from blocks [Start Block No.]

through [End Block No.] every time a trigger occurs.

Setting the output timing of the trigger signal

When the data at the specified position of the output waveform (the specified point from

the beginning of the waveform data) are output, a synchronized trigger signal is output to

the WE bus of the measuring station.

Содержание WE7281





















































Отзывы:

Нет отзывов