3-2
IM 707231-01E
3.2
Self Test
If you believe that the module is not operating correctly, perform the self test according to
the following steps.
Executing the Self Test
1. In the WE7000 Control Software, select System > Self Test.
2. In the Self Test dialog box, select the station name and slot number of the module to
be tested, and click the Execute button.
“Executing” is displayed in the Result box.
→
Verifying Test Results
If a value other than 0 is displayed in the Result box of the Self Test dialog box, the
module is probably malfunctioning. Contact your nearest YOKOGAWA representative as
listed on the back cover of this manual.
