YOKOGAWA WE7231 Скачать руководство пользователя страница 2

Страница: 2 / 34

IM 707231-01E

Disk No. WE16

1st Edition: Norbember 2001 (YK)

Foreword

Thank you for purchasing the WE7231 30-CH Fast Digital Thermometer Module, a PC-

based measurement instrument for the WE7000.

This user’s manual contains useful information about the functions and operating

procedures of the WE7231 as well as precautions that should be observed during use.

This manual is written with the assumption that you will be using the WE7000 Control

Software that is included with the measuring station.

For general information about the WE7000, (primarily the operations of the measuring

station, the optical interface module, the optical interface card, and the WE7000 Control

Software) see the WE7000 User’s Manual (IM 707001-01E).

Manual Title

Manual No.

WE7000 User’s Manual

IM707001-01E

To ensure proper use of the instrument, please read this manual thoroughly before

beginning operation.

After reading the manual, keep it in a convenient location for quick reference in the event

a question arises.

Notes

• This manual was written for version 4.2.0.0 of the WE7000 Control Software and

module firmware version 3.05. The operating procedures and screen contents

described in this manual may differ from those in other versions of the software.

• The contents of this manual are subject to change without prior notice as a result of

improvements in the instrument’s performance and functions.

• Every effort has been made in the preparation of this manual to ensure the accuracy

of its contents. However, should you have any questions or find any errors, please

contact your nearest YOKOGAWA representative listed on the back cover of this

manual.

• Copying or reproduction of all or any part of the contents of this manual without the

permission of Yokogawa Electric Corporation is strictly prohibited.

Trademarks

• Microsoft, Windows, and Windows NT are trademarks or registered trademarks of

Microsoft Corporation in the United States and/or other countries.

• Adobe and Adobe Acrobat are trademarks of Adobe Systems incorporated.

• All other company and product names used in this manual are trademarks or

registered trademarks of their respective companies.

Revisions

1st Edition: November 2001

Содержание WE7231



































Результаты поиска

Содержание WE7231

Отзывы:

Бренды по названию

Популярные бренды

YOKOGAWA WE7231, Руководство пользователя

Результаты поиска

Содержание WE7231

Отзывы:

Бренды по названию

Популярные бренды