YOKOGAWA WE430 Скачать руководство пользователя страница 8

Страница: 8 / 73

<1. General Information>

1-1

IM 12Y18A03-01EN

1st Edition : Oct. 04, 2019-00

1. General Information

This user guide covers the operation, maintenance and troubleshooting for the WE430 Hydrazine

analyzer, which offers unmatched reliability in analyzing oxygen scavengers in feedwater, boiler

water or at the economizer inlet.

Introduction

Analyzer the oxygen scavenger content at points in the steam/water circuit where dissolved

oxygen control is critical. Residual oxygen scavengers must be carefully monitored to prevent

costly overdosing, yet allow enough of the reductant in the system for metal passivation.
Excess levels of certain oxygen scavengers decompose into ammonia, which increases system

alkalinity. Efficient control of oxygen scavengers depends on maintaining a predetermined safety

zone. The WE430 Hydrazine analyzer optimizes the fluidic design with the sensing technology

to provide accurate and precise results with an almost instantaneous indication of oxygen

scavenger concentration changes.
The WE430 Hydrazine analyzer meets all of the criteria for accurate and dependable oxygen

scavenger monitoring and more. The WE430 analyzer incorporates innovative technologies that

include:

• Premium electrodes

• Marquee help screen

• Pump-less reagent addition and dynamic calibration system

Markets

• Power

• Pulp and paper

• Chemical / petrochemical

Applications

• Boiler water

• Feedwater

• Hydrazine

• Carbohydrazide

• DEHA and others

Features and Benefits

The WE430 Hydrazine analyzer is ideal for measuring and monitoring the critical oxygen

scavenger levels in feedwater, boiler water or economizer inlet. With limited maintenance

requirements and low reagent usage, the WE430 analyzer provides the highest level of

performance with easy of use.

• Measurement of oxygen scavenger concentrations in water using premium ion selective

electrode (ISE) technology.

• Accurate and precise measurements in the range of 0 ppb to 200 ppb for hydrazine:

• Reliable measurements and a wide measurement range with selectable resolution.

• Measures oxygen scavenger activity in aqueous solutions quickly, accurately and

economically.

• Premium reference and sensing electrodes:

• Superior accuracy and stability over a wide temperature range.

• Advanced flow cell design:

• Automatic sample handling and contamination control with no moving parts.

• Patented scrolling marquee:

• Intuitive menu-driven, digital user interface.

• Data log of previous measurements and calibration:

• View measurement, calibration and error history.

Содержание WE430










































































Результаты поиска

Содержание WE430

Отзывы:

YOKOGAWA WE430, Руководство пользователя, Страница: 8 / 73

Результаты поиска

Содержание WE430

Отзывы: