manualshive.com logo in svg

YOKOGAWA vigilantplant EJXMVTool FSA120, Руководство пользователя, Страница: 8 / 98

Поделиться
Скачать
YOKOGAWA vigilantplant EJXMVTool FSA120 Скачать руководство пользователя страница 8

1-3

<Toc> <Ind>

<1. Introduction>

All Rights Reserved Copyright © 2006, Yokogawa Electric Corporation

IM 01C25R51-01E

1.2

Software License Agreement for EJXMVTool

TM

License Agreement on EJX-MV Configuration DTM (EJXMVTool DTM) for Multivariable
Transmitter

IMPORTANT - PLEASE READ THIS AGREEMENT CAREFULLY:

BY INSTALLING, COPYING OTHERWISE USING THE ENCLOSED SOFTWARE PROD-
UCT AS IDENTIFIED ABOVE, YOU AGREE TO BE BOUND BY THE TERMS AND CON-
DITIONS OF THIS SOFTWARE LICENSE AGREEMENT (“AGREEMENT”).  IF YOU DO
NOT AGREE TO THE TERMS OF THIS AGREEMENT, DO NOT INSTALL, COPY OR USE
THE SOFTWARE PRODUCT AND PROMPTLY RETURN IT TO THE PLACE OF PUR-
CHASE.

1.2.1

Grant of License

(1)

Subject to the terms and conditions of this Agreement, Yokogawa Electric Corporation
(“Licensor”) hereby grants to you (“Licensee”) a non-exclusive and non-transferable
right to use the enclosed software product EJXMVTool as identified above and associ-
ated materials and documentation in printed or electronic format (Collectively “Li-
censed Software”), in consideration of full payment by Licensee to the Licensor of the
license fee separately agreed upon by Licensor or its distributor.

(2)

Licensee shall have the right to use the Licensed Software in the operating environ-
ment identified by the Licensor, either (a) to the extent specified in the specifications
as agreed upon by both parties, or (b) if not specified, for a single user on single
computer.

(3)

Licensee may use the Licensed Software solely for its own internal data processing
operations. Use of the Licensed Software for any purpose other than those as ex-
pressly specified in the documentation provided by Licensor shall be prohibited. Any
result or damage arising out of the use of licensed software shall be at Licensee’s own
risk and responsibility.

(4)

No copies of the Licensed Software shall be made without Licensor’s prior written
consent.

(5)

The Licensed Software may contain software which Licensor is licensed from third
parties (“Third Party Software”). Licensee agrees to use the Third Party Software in
accordance with the terms and conditions as set forth by licensors of such Third Party
Software and agrees to be bound thereby.

(6)

In no event shall Licensee make any use of the Licensed Software for any other
purposes or in any other manner than those stipulated hereunder.

(7)

Licensee agrees to use any Third Party Software solely as runtime use software which
shall be used solely as part of and with the integrated Licensed Software, and shall
not make any further use of Third Party Software for any other purposes or in any
other manner.

1.2.2

Restriction

Licensee shall not: (a) remove any marks or notices of the Licensed Software identification,
intellectual property rights like trademark and copyright notice, or other notices or restric-
tions from the Licensed Software; (b) transfer, sell, assign, sublicense or otherwise convey
the Licensed Software to any third party without Licensor’s prior written consent; nor (c)
cause, permit or attempt the reverse engineering, disassembly, decompilation, translation
or adaptation of the Licensed Software.  Any transfer of the Licensed Software is subject to
Licensor’s transfer policies and fees.

Содержание vigilantplant EJXMVTool FSA120



































































































Отзывы:

Нет отзывов