manualshive.com logo in svg

YOKOGAWA vigilantplant EJXMVTool FSA120, Руководство пользователя, Страница: 36 / 98

Поделиться
Скачать
YOKOGAWA vigilantplant EJXMVTool FSA120 Скачать руководство пользователя страница 36

4-13

<Toc> <Ind>

<4. Preparation>

All Rights Reserved Copyright © 2006, Yokogawa Electric Corporation

IM 01C25R51-01E

F0434E.EPS

Select COM port number.

Figure 4.13 COM port

Please refer to FieldMate User's manual for details.

(2)

Communication address setting on FieldMate

In FieldMate, the default setting of maximum scan value of communication address is “0”.

If the transmitter’s address is other than “0”,  FieldMate cannot distinguish the transmitter.

Therefore, the setting should be changed to the correct value.

1. Click the [Tool] --> [HART Modem Configuration..] at FieldMate window.

2. Select address number.

3. Click the [OK] button.

F0435E.EPS

Maximum value of communication
Addressfor scaning

Figure 4.14 Address Setting

Please refer to FieldMate for detail.

4.5

Initial Setting (FF Communication)

4.5.1

EJX910A

Address and Tags (PD Tag and VFD Tag) must be set in the EJX910A.

IMPORTANT

FSA120 does not support address setting. Use general purpose Fieldbus setting tool for
setting an address and tags.  After using general purpose Fieldbus setting tool, exit from
the program before starting EJX910 FF DTM. Please also refer to 4.7.1 FF communication
(Node Address).

4.5.2

Install NI-FBUS Card

Install the NI-FBUS card on PC.

Содержание vigilantplant EJXMVTool FSA120



































































































Отзывы:

Нет отзывов