YOKOGAWA UT Advanced UT32A, Руководство пользователя

Страница: 85 / 340

6-26
IM 05P01D31-01EN
6.7.3 Switching between REM (Remote) and LCL (Local)
Setting Display
Operation Mode Setting Display
Operation Display > PARAMETER or PARA key for 3
seconds (to [ MODE ] Menu Display) > SET/ENTER key
(The operation mode is displayed.) > Down arrow key (The
operation mode is displayed.)
The parameter R.L is displayed when the the communication
is specified.
Setting Details
Parameter
symbol
Name
Display
level
Setting range Menu symbol
R.L
REMOTE/LOCAL
switch
EASY
LCL: Local mode
REM: Remote mode
MODE
Description
REMOTE/LOCAL switching can be performed by any of the following:
(1) Contact input (status or edge)
(2) Parameter
(3) Communication
(4) User function key
表表 表表
REMOTE LOCAL
When the contact input (status) is ON, operation cannot be performed by parameter,
communication, or keystroke.
When the contact input is OFF, and the setting is switched by parameter, communication,
or keystroke, the last switching operation is performed.
The last switching operation is performed for all methods, when the action of contact
input is detected as rising edge.
► Switch by contact input: 12.1 Setting Contact Input Function
► Switch by user function key: 13.2 Assigning Function to User Function Key and A/M key
The PID group before switching from LOCAL to REMOTE is applied to the PID in remote
operation.
6.7 Switching Operation Modes