YOKOGAWA UP750, Руководство пользователя

Страница: 35 / 130

<Toc> <2. Initial Settings>
2-13
IM 05E01B02-41E
2.5 Initializing Parameters
Be sure to follow the steps below after a change of setting has been made to the data item
PV Input Type, PV Input Range or PV Input Scale.
1.
Bring the operating display into view (display appears at power-on).
PV
SET/ENT
PT.No RUN RESET
DISP MODE
PVE2
PVE1
PV2
TME
AL
1
1
2
3
4
MAN2
PRG
RST
HLD
LOC
MAN1
CAS
PTNO: 0
TM=------- SEGNO: 0/ 0
RCY: 0/ 0
SP: 0.0
°
C
RST lamp
ON.
In steps 2 and later, illustrations of the LCD are cited to explain the procedure.
2.
Press the
SET/ENT
key for more than 3 seconds
to call up the main menu “PROG”.
SET/ENT
PT.No RUN RESET
DISP MODE
programming
main menu
PROG
3.
Press the key once to display the main
menu “STUP”.
SET/ENT
PT.No RUN RESET
DISP MODE
password input
main menu
STUP
4.
Press the SET/ENT key once to display the main
menu “PARA”.
SET/ENT
PT.No RUN RESET
DISP MODE
setup parameter
SETUP main menu
PARA
5.
Press the key once to display the main
menu “UPMD”.
SET/ENT
PT.No RUN RESET
DISP MODE
SETUP main menu
UP750 configuration
UPMD
6.
Press the SET/ENT key once to display the
submenu “MD”.
SET/ENT
PT.No RUN RESET
DISP MODE
UP mode set
SETUP sub menu
MD
7.
Press the key twice to display the
submenu “INIT”.
SET/ENT
PT.No RUN RESET
DISP MODE
SETUP sub menu
parameter initialize
INIT
1st Edition : May 31,2000-00