manualshive.com logo in svg

YOKOGAWA TM20, Руководство пользователя, Страница: 67 / 111

Поделиться
Скачать
YOKOGAWA TM20 Скачать руководство пользователя страница 67

58

IM 54011-E

58

58

5  Confirm, Modify, Clear, or Delete the Data with the Main Unit

5.5

Confirming the log setup
data

This section explains the procedure used to
confirm the log setup data.

Home screen

18:54:27

222

222

25.9

°

C

1.

Press the [FUNC], [2], and [1] keys, in
order.

The “Curr Log” screen appears on the LCD.

F21

C u r r L o g

2.

Press the [SET] key.

Convey

1 2

3.

Press the [

▼

] key repeatedly until the

log to be confirmed is displayed on the
screen.

Accept

0

4.

Press the [SET] key.

The current interval is displayed.

I n t e r v a l

0 0 : 0 0 : 1 0

5.

Press the [SET] key.

The current period (the number of days selected from
the options, including also the number of hours, min-
utes, and seconds) is displayed.

ProdDay

2

6.

Press the [SET] key.

The current period (the number of hours, minutes,
and seconds from the options including also the num-
ber of days) is displayed.

ProdTime

0 0 : 0 0 : 3 0

[TIP]

If the [SET] key is pressed, the screen used to
confirm the interval set in step 4 is restored.

Press the [ESC] key repeatedly to return to the Home
screen.

-End of procedure-

5.6

Modifying the log name
and setup data (measure-
ment interval and period)

This section explains the procedure used to
modify the log name, measurement interval,
and measurement period.

Home screen

18:54:27

222

25.9

°

C

Содержание TM20
















































































































Отзывы:

Нет отзывов