YOKOGAWA TM20 Скачать руководство пользователя страница 65

Страница: 65 / 111

IM 54011-E

5 Confirm, Modify, Clear, or Delete the Data with the Main Unit

Press the [SET] key.

Beef

Enter a new tag name to be modified.

Pork

[TIP]

A tag name that has not been modified is dis-
played. If it needs to be modified, overwrite it
with a new tag name.

See Also

For how to enter letters and numbers, refer to
Chapter 6, “How to Input Characters” in the
“Before Use” part.

Press the [SET] key.

The confirmation dialog box appears.

Change?

Ye s 1 / N o 0

Press the [1] key.

The tag name after modification is displayed.

Pork

The tag name has been modified.
Press the [ESC] key repeatedly to return to the Home
screen.

-End of procedure-

5.3

Clearing the measurement
data associated with the tag

This section explains the procedure used to
clear the measurement data obtained with the
collector function. However, the setup data
(tag name) will not be cleared.

Home screen

18:54:27

222

25.9

Press the [FUNC], [4], and [1] keys, in
order.

The “1TagFile” screen appears on the LCD.

F41

1 T a g F i l e

Press the [SET] key.

Burger

1 2

Press the [

▼

] key repeatedly until a tag

with measurement data that is to be
cleared is displayed on the screen.

Chicken

2 7

Press the [SET] key.

The confirmation dialog box appears.

TagClr?

Ye s 1 / N o 0

Содержание TM20
















































































































Результаты поиска

Содержание TM20

Отзывы:

YOKOGAWA TM20, Руководство пользователя, Страница: 65 / 111

Результаты поиска

Содержание TM20

Отзывы: