manualshive.com logo in svg

YOKOGAWA TM20, Руководство пользователя, Страница: 60 / 111

Поделиться
Скачать
YOKOGAWA TM20 Скачать руководство пользователя страница 60

51

IM 54011-E

4  Setting Up with the Main Unit

51

51

Preparing f

o

r

Measurement

4.

Press the [SET] key.

5.

Enter the operator name with a maxi-
mum of eight characters.

2

See Also

For how to enter a character or number, refer
to Chapter 6, “How to Input Characters” in the
“Before Use” part.

6.

Press the [SET] key.

The screen for confirming the settings appears.

Entry?

Ye s 1 / N o 0

7.

Press the [1] key.

The specified operator name has been set.
Press the [ESC] key repeatedly to return to the Home
screen.

-End of procedure-

■

Setting comments

Home screen

18:54:27

222

222

25.9

°

C

1.

Press the [FUNC], [0], and [2] keys in
order.

F02

C o m m e n t

2.

Press the [SET] key.

A screen for setting comments then appears.

1

D i s c a r d

3.

Press the [

▼

] key repeatedly until the

desired comment number is called up.

2

[TIP]

Up to 32 comments, which are serially num-
bered, can be set in a TM20.

See Also

For how to enter letters and numbers, refer to
Chapter 6, “How to Input Characters,” in the
“Before Use” part.

4.

Press the [SET] key.

5.

Enter a comment of up to 8 characters.

2

6.

Press the [SET] key.

The screen asks you to confirm the setting.

Entry?

Ye s 1 / N o 0

7.

Press the [1] key.

The comment is then set.

Press the [ESC] key repeatedly to return to the home
screen.

- End of procedure -

Содержание TM20
















































































































Отзывы:

Нет отзывов