YOKOGAWA TM20 Скачать руководство пользователя страница 35

Страница: 35 / 111

IM 54011-E

3 Setting Up with the Personal Computer

3.3

Files created on a computer for settings of TM20

Tag/log table i

Setup file 1

Setup file 2

Select Reference Table

Many setup files can
be created from the same
tag/log table.

Files that contain settings to be written
(downloaded) to a TM20.

Select a tag/log table. Based on this tag/log table,
abbreviated names will be replaced with the respective full names.

Tag/log tables, person tables, and comment tables.

Used previously to make a variety of measurement settings as lists of the respective settings.
By simply choosing an entry from each table, you can create a setup file for your TM20.

Setup files, person settings, and comment setting.

Files containing settings to be written (downloaded) to a TM20.

Tables of settings for creating setup files.
Each table contains settings required for measurement.

Abbreviated tag and log names can be replaced with the respective full names.

Person table j

Person setting 1

Person setting 2

Person setting 3

Comment table k

Comment setting 1

Comment setting 2

Select Reference Table

Abbreviated person names can be replaced with the respective full names.

Select Reference Table

Abbreviated comment names can be replaced with the respective full names.

Содержание TM20
















































































































Результаты поиска

Содержание TM20

Отзывы:

YOKOGAWA TM20, Руководство пользователя, Страница: 35 / 111

Результаты поиска

Содержание TM20

Отзывы: