YOKOGAWA TB820D Скачать руководство пользователя страница 2

Страница: 2 / 87

IM 12E01B30-02EN

<INTRODUCTION>

2nd Edition : June 09 , 2021-00

INTRODUCTION

Thank you for purchasing TB820D Right Angle Scattered Light Turbidity Detector, FLXA402T

Liquid Analyzer for Turbidity and Chlorine.

This User’s Manual contains all essential information for the user to make full use of TB820D and

FLXA402T.

Please read the following respective documents before installing and using the instrument.

The related documents are listed as follows.

General Specifications

Contents

Document number

Note

TB820D, FLXA402T Right Angle

Scattered Light Turbidity Analyzer

GS 12E01B30-01EN

Online manual

“EN” in the document number is the language code.

User’s Manual

Contents

Document number

Note

TB820D Right Angle Scattered Light

Turbidity Detector

Start-up and Safety Precautions

IM 12E01B30-01EN

Attached to the product (printed manual)

TB820D Right Angle Scattered Light

Turbidity Detector

IM 12E01B30-02EN

Online manual (this manual)

FLXA402T Liquid Analyzer for Turbidity

and Chlorine

Start-up and Safety Precautions

IM 12A01G01-01EN

Attached to the product (printed manual)

FLXA402T Liquid Analyzer for Turbidity

and Chlorine

Installation and Wiring

IM 12A01G01-02EN

Online manual

FLXA402T Liquid Analyzer for Turbidity

and Chlorine

Operation of Converter

IM 12A01G01-03EN

Online manual

FLXA402T Liquid Analyzer for Turbidity

and Chlorine

Operation of pH

IM 12A01G02-01EN

Online manual

FLXA402T Liquid Analyzer for Turbidity

and Chlorine

Operation of SC

IM 12A01G03-01EN

Online manual

“EN” in the document number is the language code.

An exclusive User’s Manual might be attached to the products whose suffix codes or option codes

contain the code “Z” (made to customers’ specifications). Please read it along with this manual.

Technical Information

Contents

Document number

Note

FLXA402T Liquid Analyzer for Turbidity

and Chlorine

MODBUS Communication

TI 12A01G01-62EN

Online manual

“EN” in the document number is the language code.

You can download the latest

documents

from our website. Scan QR code.

http://www.yokogawa.com/an/flxa402t/download/

Refer to each corresponding manual for other related products.

No.IM 12E01B30-02EN

2nd Edition: June 2021 (YK)

Содержание TB820D
























































































Результаты поиска

Содержание TB820D

Отзывы:

YOKOGAWA TB820D, Руководство пользователя, Страница: 2 / 87

Результаты поиска

Содержание TB820D

Отзывы: