YOKOGAWA TA720, Руководство пользователя

Страница: 145 / 228

11-7
IM 704510-01E
Saving/Recalling Data and Outputting Screen Images
3
2
1
4
5
6
7
8
9
10
11 11
12
13
14
15
9. Turn the rotary knob to select AutoNaming. Press the SELECT key to select
ON or OFF.
10. Turn the rotary knob to select File Name and press the SELECT key.
A keyboard appears on the screen.
11. Use the rotary knob and SELECT key to enter the file name.
For the procedure to enter the character string, see section 4.4.
12. As necessary, select Comment and enter the comment string in a similar
fashion.
Executing the Save Operation
13. Press the Save Exec key.
When the Save Exec key is pressed, the setup parameters are saved to the
directory shown in [Path=......]. While the data is being saved, the soft key name
changes to Abort. Press the Abort soft key before the save operation
completes to abort the save operation.
Recalling the Setup Parameters
4. After step 3, press the Load soft key to display the File List.
5. Turn the rotary knob to select the storage medium (indicated with ) to be recalled
and press the SELECT key.
6. Likewise, select the directory (indicated with < >).
[Path=......] shows the selected storage medium/directory.
To show only the files with the .SET extension on the file name list, press the Filter
soft key to select [*.SET]. To show all the files, select [*.*]. Press the Property
soft key to display the properties of the file that is selected in the list.
7. Turn the rotary knob to select the setup parameter file.
Setup parameter files are files with the .set extension.
11.4 Saving and Recalling Setup Parameters