App-2
IM 704310-12E
Appendix 2 Error Messages
Communication error messages are described below.
• If servicing is required, contact your nearest YOKOGAWA dealer as listed on the back
cover of this manual.
• For error messages other than communication error messages, see the User
'
s
Manual IM704310-01E.
Error in communication command (100 to 199)
Code
Message
Action
Reference Page
102
Syntax error
Syntax error other than the codes given below.
Chap. 2, 3
103
Invalid separator
There is no <DATA SEPARATOR>.
2-1
Use a comma (,) to separate data.
104
Data type error
Invalid <DATA> type.
2-5 to 2-6
See pages 2-5 and 2-6 and enter data using the correct format.
108
Parameter not allowed
There are too many <DATA> parameters.
2-5, Chap. 3
Check the number of parameters.
109
Missing parameter
A required <DATA> parameter is missing.
2-5, Chap. 3
Enter the required parameters.
111
Header separator error
There is no <HEADER SEPARATOR>.
2-2
Use a space to separate the header and data.
112
Program mnemonic too long
<mnemonic> is too long.
Chap. 3
Check the mnemonic (string made of alphanumeric characters).
113
Undefined header
No such command.
Chap. 3
Check the header.
114
Header suffix out of range
The <HEADER> value is not correct.
Chap. 3
Check the header.
120
Numeric data error
The mantissa is missing from the value.
2-5
A mantissa must be placed before the exponent in <NRf> format.
123
Exponent too large
The exponent is too large
2-5, Chap. 3
Use a smaller number for the exponent following
"
E
"
in <NR3> format.
124
Too many digits
Too many significant digits.
2-5, Chap. 3
Limit the number of digits to 255 or less.
128
Numeric data not allowed
Numerical data cannot be used.
2-5, Chap. 3
Enter the value using a format other than <NRf> format.
131
Invalid suffix
Invalid unit.
2-5
Check the units for <Voltage> and <Time>
134
Suffix too long
The unit is too long.
2-5
Check the units for <Voltage> and <Time>
138
Suffix not allowed
Units cannot be used.
2-5
Units cannot be used for values other than <Voltage> and <Time>.
141
Invalid character data
No such selection.
Chap. 3
Enter one of the string from {...|...|...}.
144
Character data too long
The <CHARACTER DATA> is too long.
Chap. 3
Check the spelling of {...|...|...}.
148
Character data not allowed
<CHARACTER DATA> cannot be used.
Chap. 3
Enter the value in a format other than {...|...|...}.
150
String data error
The right separator for <STRING DATA> is missing.
2-6
Use
"
”
"
or
"
’
"
to enclose the <STRING DATA>.
151
Invalid string data
The contents of <STRING DATA> are invalid.
Chap. 3
The <STRING DATA> is too long or contains invalid characters.
158
String data not allowed
<STRING DATA> cannot be used.
Chap. 3
Use a data format other than <STRING DATA>.
161
Invalid block data
The length of <BLOCK DATA> is not correct.
2-6, Chap. 3
<BLOCK DATA> cannot be used.
Appendix 2 Error Messages