6
IM 704210-01E
Notations and Symbols Used in this Manual
Unit
k :1000 (e.g. 100 kHz)
K :1024 (e.g. 640 KB (floppy disk memory capacity))
Symbols Used
The following symbols are used in this User’s Manual.
To avoid injury or death of personnel, or damage to the instrument, the
operator must refer to the User’s Manual. In the User’s Manual, these
symbols appear on the pages to which the operator must refer.
WARNING
Describes precautions that should be observed to prevent the danger of
serious injury or death to the user.
CAUTION
Describes precautions that should be observed to prevent the danger of
minor or moderate injury to the user, or the damage to the property.
Note
Provides information that is important for proper operation of the
instrument.
Symbols used on pages where description of operation is given
The following symbols are used in chapters 3 to 11, to classify descriptions.
P r o c e d u r e
P r o c e d u r e
Describes keys to be used and operating procedure. With some operating
procedures, it is not necessary to carry out the steps according to the order
in which they are described.
Explanation
Explanation
Gives a detailed description of settings and restrictions regarding
operations. No detailed description is given for the function. For a
detailed description of the function, refer to Chapter 1.
