YOKOGAWA SL1400 ScopeCorder LITE Скачать руководство пользователя страница 96

Страница: 96 / 589

3-14

IM 701240-01E

Explanation

Date (Year/Month/Day)

Set the year, month and day.

Time (Hour/Minute/Second)

Set the time using a 24-hour clock.

Setting the Time Using the SNTP Server

You can use the SNTP server time to set the date and time on the instrument.

This function is available on models with the Ethernet interface installed.

For details on SNTP and GMT, see section 15.8.

The time difference from GMT specified here is linked to the setting of 15.8.

Note

•

The date and time information is backed up with the internal lithium battery, even if the power

is turned OFF.

•

Leap year information is retained.

•

If you are using the Web server function (when the Ethernet interface option is installed), you

must set the time offset from GMT (Greenwich Mean Time) in addition to the date and time.

For the setup procedure, see section 15.8.

3.6 Setting the Date and Time

Содержание SL1400 ScopeCorder LITE














































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание SL1400 ScopeCorder LITE

Отзывы:

Похожие инструкции для SL1400 ScopeCorder LITE

Бренды по названию

Популярные бренды

YOKOGAWA SL1400 ScopeCorder LITE, Руководство пользователя

Результаты поиска

Содержание SL1400 ScopeCorder LITE

Отзывы:

Похожие инструкции для SL1400 ScopeCorder LITE

Бренды по названию

Популярные бренды