YOKOGAWA SL1400 ScopeCorder LITE Скачать руководство пользователя страница 71

Страница: 71 / 589

2-40

IM 701240-01E

X-Y Recorder Mode «For procedures, see section 9.6.»

X-Y Waveform Recording:

In X-Y waveform recording, the X-Y waveform display starts when waveform acquisition

is started. If reprint is executed from the Reprint Setup menu after the record length of

waveform (fixed to 1 MW) is acquired or after stopping waveform acquisition, the X-Y

waveform acquired up to the point immediately before the measurement was stopped is

recorded on paper.

The scale of the X-Y waveform recording is 10 mm per division for both X- and Y-axes,

and the waveform recording area is

10 divisions (20 divisions). The screen also shows

the X-Y waveform. Recording to paper can also be started automatically when waveform

acquisition is stopped (auto print).

Acquisition Mode during X-Y Recorder Mode

The acquisition mode is automatically set to normal mode during X-Y record mode. The

acquisition mode cannot be changed using the Menu key > ACQ menu as with the

normal operation.

Saving Data in the Internal Memory

In X-Y recorder mode, up to 1 MW of data is automatically saved in the internal memory.

Also, a PDF file of the reprint image can be created.

Functions That Cannot Be Used during X-Y Recorder Mode

When making measurements in X-Y Recorder mode, functions of history memory and

waveform computation cannot be used (The HISTORY key and MENU key > MATH

menu cannot be used). In addition, items set using the MENU key > ACQ menu cannot

be changed.

Measured Data Compatibility

The measured data in X-Y Recorder mode is not compatible with the measured data in

Memory mode. The measured/saved data in X-Y Recorder mode cannot be loaded in

Memory mode, and vice versa.

Reprinting on the Built-in Printer (Only during T-Y Recording) «For procedures, see
section 9.7.»

After the T-Y recording in Chart Recorder mode is finished, the data stored in the internal

memory can be recalled and reprinted by changing the print conditions.

Creating a PDF File of the Reprint Image «For procedures, see section 9.8.»

After the waveform recording in Chart Recorder mode or X-Y Reorder Mode is finished,

the data stored in the internal memory can be recalled and a PDF file of the reprint

image can be created.

In X-Y Recorder Mode, the most recent 1 MW of data stored in the internal memory are

output to the PDF file. If data exceeding 1 MW is recalled, the waveform displayed on the

screen and the waveform recorded on the printer may differ from the waveform output to

the PDF file.

2.5 Recording in Recorder Mode

Содержание SL1400 ScopeCorder LITE














































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание SL1400 ScopeCorder LITE

Отзывы:

YOKOGAWA SL1400 ScopeCorder LITE, Руководство пользователя, Страница: 71 / 589

Результаты поиска

Содержание SL1400 ScopeCorder LITE

Отзывы: