YOKOGAWA SL1400 ScopeCorder LITE Скачать руководство пользователя страница 67

Страница: 67 / 589

2-36

IM 701240-01E

Scale Values «For procedures, see section 8.9.»

The upper and lower limits (scale values) of the vertical and horizontal axes of each

channel can be displayed.

Waveform Labels «For procedures, see section 8.10.»

A waveform label can be assigned arbitrarily to the input waveform of each channel

using up to eight characters.

Extra Window «For procedures, see section 8.11.»

This area displays data such as cursor measurement values and values resulting from

automated measurement of waveform parameters. The extra window is useful when

reading of the values is difficult because waveforms are overlapping them.

Level Indicators «For procedures, see section 8.12.»

The level of each waveform is displayed using an indication mark to the right of the

waveform display frame.

Trigger position

Scale value

Extra window
(Displays cursor
measurement values)

Waveform label

Level indicator

Channel Information, Numeric Monitor, and Waveform Display Area Expansion «For
procedures, see section 8.13.»

If you clear the setup menu by pressing ESC, channel information is displayed such as

the voltage/division, input coupling, probe attenuation (type), bandwidth limit,

temperature/division , thermocouple type,

STR/division (or [mV/V]/division),

measurement range, acceleration/div, gain, bias, value/division, measurement mode,

and preset settings. However, some items are skipped when the number of displayed

channels increases.

Pressing ESC once when the channel information is displayed clears the channel

information and shows the numeric monitor.

Pressing ESC once when the numeric monitor is displayed expands the waveform

display area horizontally to cover the entire screen.

If you press SELECT when the channel information or waveform monitor is displayed or

when the waveform display area is expanded and an item is under jog shuttle control in

the setup menu that was showing immediately before you pressed ESC, the item is

displayed at the upper right of the display and can be controlled using the jog shuttle.

2.4 Setting Waveform Acquisition Conditions and Display Conditions

Содержание SL1400 ScopeCorder LITE














































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание SL1400 ScopeCorder LITE

Отзывы:

YOKOGAWA SL1400 ScopeCorder LITE, Руководство пользователя, Страница: 67 / 589

Результаты поиска

Содержание SL1400 ScopeCorder LITE

Отзывы: