YOKOGAWA SL1400 ScopeCorder LITE Скачать руководство пользователя страница 495

Страница: 495 / 589

16-5

IM 701240-01E

Other Operations

App

Index

16.4 Turning OFF the Backlight and Setting the

Brightness of the Backlight

Procedure

Press

MENU

Press the

Next 1/2

soft key.

Press the

Others

soft key.

Press the

Next 1/2

soft key.

Press the

LCD

soft key.

Setting Backlight Auto Off

Press the

Auto OFF

soft key to select ON or OFF.

If you set Auto OFF to ON, proceed to step 7.

Press the

Auto OFF Time

soft key.

Turn the

jog shuttle

to set the time when the backlight will automatically turn

OFF.

Setting the Backlight Brightness

Press the

Brightness

soft key.

10.

Turn the

jog shuttle

to set the backlight brightness.

Turning ON/OFF the Backlight

11.

Press the

LCD OFF Exec

soft key. The backlight turns OFF.

Press any key to return to the measurement screen.

Explanation

Turning ON/OFF the Backlight (LCD OFF Exec)

Turns ON/OFF the LCD backlight. If a key is pressed when the backlight is OFF, the

screen returns to the measurement screen.

Setting the Backlight Auto OFF (Auto OFF, Auto OFF Time)

The backlight automatically turns OFF, if there is no key operation for the specified time.

Setting the Backlight Brightness

You can change the brightness of the backlight. Set the brightness in the range of 0

(darkest) to 7 (brightest).

The lifetime of the backlight can be prolonged by dimming the backlight or turning OFF

the backlight when it is not necessary.

Содержание SL1400 ScopeCorder LITE














































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание SL1400 ScopeCorder LITE

Отзывы:

YOKOGAWA SL1400 ScopeCorder LITE, Руководство пользователя, Страница: 495 / 589

Результаты поиска

Содержание SL1400 ScopeCorder LITE

Отзывы: