YOKOGAWA SL1400 ScopeCorder LITE Скачать руководство пользователя страница 445

Страница: 445 / 589

15-4

IM 701240-01E

Setting the DNS

Use

jog shuttle

SELECT

to set DNS to ON, OFF, or AUTO. (AUTO can be

specified when DHCP is ON.)

When DNS is set to AUTO, the domain name and DNS server name are

automatically configured by power-cycling the SL1400.

If DNS is set to ON, the domain name, DNS server name, and domain suffix are

displayed.

If DNS is set to OFF, check the network cable connection and power cycle the

SL1400.

Setting the Domain Name

10.

Use

jog shuttle

SELECT

to select Domain Name.

11.

Enter the domain name according to the procedure given in section 4.2.

Setting the DNS Server

12.

Use

jog shuttle

SELECT

to select DNS Server1 (primary DNS server) and set

the primary DNS server address in the range of 0 to 255.

13.

Likewise, set the secondary DNS server address in DNS Server2.

Setting the Domain Suffix

14.

Use

jog shuttle

SELECT

to select Domain Suffix1 and set the primary domain

suffix.

15.

Likewise, set the secondary domain suffix in Domain Suffix2.

Turning ON/OFF the Power

16.

To apply the new settings, the SL1400 must be power cycled.

After all the settings are complete, turn the power to the SL1400 OFF, then back

ON again.

15.2 Setting up the TCP/IP

Содержание SL1400 ScopeCorder LITE














































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание SL1400 ScopeCorder LITE

Отзывы:

YOKOGAWA SL1400 ScopeCorder LITE, Руководство пользователя, Страница: 445 / 589

Результаты поиска

Содержание SL1400 ScopeCorder LITE

Отзывы: