manualshive.com logo in svg

YOKOGAWA SL1400 ScopeCorder LITE, Руководство пользователя, Страница: 380 / 589

Поделиться
Скачать
YOKOGAWA SL1400 ScopeCorder LITE Скачать руководство пользователя страница 380

13-9

IM 701240-01E

Saving and Loading Data

3

2

1

4

5

6

7

8

9

10

11

12

13

13

14

15

16

17

18

App

Index

Selecting the PC Card, or USB Storage Device Format

6.

Press the 

Format

 soft key. The format selection menu appears.

No setting is necessary in formatting the PC card, or USB storage device.

Proceed to step 11.

Selecting the Number of Partitions of the SCSI Device

6.

Press the 

Format

 soft key. The format selection menu appears.

7.

Press the 

Partition

 soft key.

8.

Turn the 

jog shuttle

 to set the number of partitions.

Proceed to step 9.

Note

The number of partitions is 1 for removable disks (such as SCSI and Zip disks).

Selecting the Number of Partitions of the Internal Hard Disk (Option)

• Selecting the Number of Partitions

6.

Press the 

Format 

soft key. The format selection menu appears.

7.

Press the 

Partition 

soft key.

8.

Turn the 

jog shuttle 

to set the number of partitions to 2 or 3.

• Setting the Realtime Recording Area

9.

Press the 

RealTime Recording Area 

soft key.

10.

Turn the 

jog shuttle 

to set the realtime recording area in the range of 30 to 70%

of the entire capacity of the internal hard disk. Proceed to step 11.

Note

Do not place files other than those created by realtime recording in the Real Time area of the
internal hard disk. Otherwise, the realtime recording may not operate properly.

PC card/

USB storage

SCSI device

Internal

hard disk

13.6  Formatting the Storage Medium

Содержание SL1400 ScopeCorder LITE














































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов