YOKOGAWA SL1400 ScopeCorder LITE Скачать руководство пользователя страница 340

Страница: 340 / 589

11-22

IM 701240-01E

• V (Vertical) Cursor

Measures the X-axis value at the cursor position.

The X-axis value at V Cursor1

The X-axis value at V Cursor2

∆

The difference between the X-axis values at V Cursor1 and V Cursor2

• H&V Cursor

Measures the Y-axis and X-axis value at the cursor position.

The Y-axis value at H Cursor1

The Y-axis value at H Cursor2

∆

The difference between the Y-axis values at H Cursor1 and H Cursor2

The X-axis value at V Cursor1

The X-axis value at V Cursor2

∆

The difference between the X-axis values at V Cursor1 and V Cursor2

• Marker Cursors

Move the cursor on the waveform data and measure the value of each point on the

waveform.

Display the time difference from the trigger point at the cursor

The X-axis value at Cursor

The Y-axis value at Cursor

Movement Range of the Cursors (When Not Displaying the X-Y Waveform)

• H Cursor

Can be set in the range of

5 divisions. The resolution is 0.01 division.

• V Cursor, Marker Cursor, and Angle Cursor

Can be set in the range of

5 divisions. The resolution is 10 divisions/record length.

Movement Range of the Cursors (When Displaying the X-Y Waveform)

• H Cursor, V Cursor, and H&V Cursor

Can be set in the range of

5 divisions. The resolution is 0.01 division.

• Marker Cursors

Can be set in the range of

5 divisions. The resolution is 10 divisions/record length.

Display Format of Logic Waveforms (When Not Displaying the X-Y Waveform)

You can set the following items when measuring logic waveforms using V cursors.

• Selecting the Notation of Cursor Measurement Values: Format

Select the notation system used to display cursor measurement values.

Binary:

Displays values in binary notation.

Hexa:

Displays values in hexadecimal notation.

• Read Direction of Bit Data: Order

Select the direction of reading the bit data of the logic input.

A1->A8 B1->B8:

Bit 1 to bit 8 of LogicA, bit 1 to bit 8 of LogicB

B8->B1 A8->A1:

Bit 8 to bit 1 of LogicB, bit 8 to bit 1 of LogicA

11.4 Measuring Waveforms Using Cursors

Содержание SL1400 ScopeCorder LITE














































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание SL1400 ScopeCorder LITE

Отзывы:

YOKOGAWA SL1400 ScopeCorder LITE, Руководство пользователя, Страница: 340 / 589

Результаты поиска

Содержание SL1400 ScopeCorder LITE

Отзывы: