YOKOGAWA SL1400 ScopeCorder LITE Скачать руководство пользователя страница 321

Страница: 321 / 589

11-3

IM 701240-01E

Waveform Analysis/Search

App

Index

Explanation

The acquisition memory retains waveform data of the last specified number of triggers.

If a trigger is activated beyond the number of triggers that can be held, the oldest

waveform data is cleared.

Selected Record No.

The selectable range is 0 to –(the number of retained waveforms – 1). The default value

is 0. The most recent (current) waveform is 0, the waveform previous to that is –1, and

so on.

The number of triggers that can be held varies depending on the selected record length.

For details, see appendix 2.

If the trigger count is 1, only the displayed waveform is held in the acquisition memory;

waveform data in the past are not held.

Display Mode

• Display Waveform Data of a Single Record: One

Select the waveform to be displayed using Select Record in the range specified by

Start Record and End Record.

• Display All of the Selected Waveform Data: All

The waveform data specified by Start Record and End Record are displayed

accumulated. The waveform data selected by Select Record is displayed brightly.

• Average Display of the Selected Waveform Data: Ave

The waveform data specified by Start Record and End Record are displayed

averaged.

Show Map (A List of History Maps)

You can list the number of the waveform data stored in the acquisition memory and the

time at acquisition end. One screen displays 75 data points of information. You can scroll

through the data by using the jog shuttle.

Clearing the Waveform Data

• Clears all the waveforms in the acquisition memory.

• Cleared waveforms cannot be recovered.

Notes When Setting the History Memory Function

• You cannot use the history memory function when realtime recording is in progress.

• You cannot use the history memory function, if the acquisition mode is Average.

• If you abort the waveform acquisition, the triggered waveform is displayed as a valid

waveform.

• History records are not lost when waveform acquisition is stopped and then restarted,

provided that acquisition conditions remain unchanged.

• If you change the acquisition settings, history memory is cleared when you restart

acquisition using the new settings.

For details on the waveform acquisition conditions, see section 7.1.

• Average display is not possible on the following waveforms.

• Waveforms of a record length greater than equal to 1 MW.

11.1 Displaying History Waveforms

Содержание SL1400 ScopeCorder LITE














































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание SL1400 ScopeCorder LITE

Отзывы:

Похожие инструкции для SL1400 ScopeCorder LITE

Бренды по названию

Популярные бренды

YOKOGAWA SL1400 ScopeCorder LITE, Руководство пользователя

Результаты поиска

Содержание SL1400 ScopeCorder LITE

Отзывы:

Похожие инструкции для SL1400 ScopeCorder LITE

Бренды по названию

Популярные бренды