YOKOGAWA SL1400 ScopeCorder LITE Скачать руководство пользователя страница 294

Страница: 294 / 589

9-18

IM 701240-01E

Auto Print

Select whether to automatically perform the X-Y waveform recording (printing) on the

built-in printer when the waveform acquisition is stopped.

Selecting the X-Y Waveform to Be Displayed (Recorded)

• Select the X-Y waveform to be recorded (displayed) from XY1 to XY4.

• Assign channels to the X- and Y-axes for each item between XY1 and XY4. For the

channels that can be assigned, see the explanation in section 8.6. You cannot select

Math1 to Math8 in the table in section 8.6.

Graticule

Grid (Type)

The grid type is the same as with the T-Y waveform recording. For details, see page

9-8.

Dark/Light

Set the graticule dark/light setting to Light or Dark.

Setting the Grid Width of the X- and Y-Axes

Select how to set the grid of the X- and Y-axes. For details on the format of the grid

lines that are printed, see page 9-9.

1Div:

Grid that divides the recording area into 10 areas

10mm:

mm graticule type

Scale

Select whether to print the scale.

Pointer

Select whether to display the pointer that indicates the most recent recording position on

the screen.

The pointer is only displayed on the screen and not printed on the printer.

Print Font

Select the print font size to small or large. The setting applies to all printed characters.

Comment

A comment string of up to 20 characters can be printed at the lower right section. This

setting is linked with the PRINT menu > Comment setting.

Starting/Stopping the X-Y Waveform Recording

When you press START/STOP, the waveform acquisitions starts, and the screen shows

the X-Y waveform. Pressing START/STOP again stops the waveform acquisition.

If auto print is turned ON, the X-Y waveform recording on the built-in printer starts when

the data acquisition stops. The waveform that is acquired between start and stop is

recorded.

The reprint function (see section 9.7) can be used to execute the X-Y waveform

recording on the built-in printer when auto print is turned OFF.

The most recent 1 MW of data that are acquired during the X-Y waveform recording are

saved to the internal memory of the SL1400. The data can be used in the automated

measurement of waveform parameters* (see section 11.5) and cursor measurements

(excluding the marker cursor. See section 11.4). The data can also be saved to a

storage medium.

Area computation on the X-Y waveform is performed only on XY1.

9.6 Recording X-Y Waveforms

Содержание SL1400 ScopeCorder LITE














































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание SL1400 ScopeCorder LITE

Отзывы:

Похожие инструкции для SL1400 ScopeCorder LITE

Бренды по названию

Популярные бренды

YOKOGAWA SL1400 ScopeCorder LITE, Руководство пользователя

Результаты поиска

Содержание SL1400 ScopeCorder LITE

Отзывы:

Похожие инструкции для SL1400 ScopeCorder LITE

Бренды по названию

Популярные бренды