manualshive.com logo in svg

YOKOGAWA SL1400 ScopeCorder LITE, Руководство пользователя, Страница: 284 / 589

Поделиться
Скачать
YOKOGAWA SL1400 ScopeCorder LITE Скачать руководство пользователя страница 284

9-8

IM 701240-01E

Explanation

Set the recording format for printing the T-Y waveform to the built-in printer. For a T-Y

waveform recording print example on the built-in printer, see the next section.

Selecting the Display (Recording) Format

Select the number of divisions of the recording area for recording to the built-in printer.

This setting is linked with the DISPLAY menu > Format setting.

1 Zone

2 Zone

3 Zone

4 Zone

8 Zone

16 Zone

Extra Area

You can set the extra area only when the format is set to 1 Zone, 2 Zone, 3 Zone, or 4

Zone.

When the Format Is 1 Zone

If the extra area is turned ON, the top 16 cm of the recording area (20 cm) is used to

record waveforms, and the remaining 4 cm is used to record waveform information

(extra area). Annotations (see page 9-10) and logic waveforms are recorded in the

extra area. The default setting is OFF.

When the Format Is 2 Zone, 3 Zone, or 4 Zone

If the extra area is turned ON, the area below each of the divided waveform recording

area is used to record waveform information (extra area). If the extra area is turned

OFF, the extra area between each waveform recording area disappears. The vertical

axis of each waveform recording area is adjusted automatically according to the paper

size and recorded. The default setting is ON.

Flexible Zone

The flexible zone can be set only when the display (recording) format is 1 Zone and the

extra area is OFF. The position in the recording area (20 cm) where each waveform is to

be recorded is set with Upper and Lower (%). The Upper value can be set in the range of

2% to 100%. The Lower value can be set in the range of 0% to 98%. The resolution of

each value is 1%. The minimum zone width (the difference between the Upper and

Lower values) is 2%.

[Example] • When Flexible Zone on CH1 is set to Upper = 20% and Lower = 0%

The CH1 waveform is recorded in the area from the bottom to 4 cm of the

recording area.

• When Flexible Zone on CH2 is set to Upper = 80% and Lower = 20%

The CH2 waveform is recorded in the area from 4 cm to 16 cm from the

bottom of the recording area.

0 %

Upper: 20 %

Lower: 0 %

100 %

0 %

Upper: 80 %

Lower: 20 %

100 %

Recor

ding area

Recor

ding area

Paper feed direction

Paper feed direction

Graticule

Grid (Type)

Select the grid type from 

, OFF, or 

. This setting is linked with the DISPLAY menu >

Graticule setting. However, if OFF is selected, the DISPLAY menu is set to 

.

9.3  Setting the Recording Format of T-Y Waveform Recording

Содержание SL1400 ScopeCorder LITE














































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов