YOKOGAWA SL1400 ScopeCorder LITE Скачать руководство пользователя страница 238

Страница: 238 / 589

7-2

IM 701240-01E

Conditions When Waveform Acquisition Cannot Be Started or Stopped

• When the SL1400 is being controlled remotely via communications.

• While printing is in progress or during auto setup.

Waveform Acquisition Mode at Power ON

You can select whether to start the waveform acquisition at power on. For example,

select ON if you want to start the waveform acquisition when power supply recovers after

a power failure. The default setting is OFF.

ON:

Starts waveform acquisition at power on.

OFF: Does not start the waveform acquisition at power on.

Response Time of the START/STOP Key

You can set whether the SL1400 responds immediately when START/STOP is pressed

or when the key is held down for at least 1 second.

Quick:

Immediate response.

>1sec:

Responds when the key is held down for at least 1 second.

Note

•

If you start the waveform acquisition after changing the waveform acquisition conditions

indicated below, the past data that is stored in the acquisition memory is cleared.

•

Setup conditions on the ACQ menu

•

Setup conditions of the module

•

Input coupling of the 701261 (UNIVERSAL), 701262 (UNIVERSAL (AAF)), or 701265

(TEMP/HPV) (when a change is made between TC and some other setting) and the

thermocouple type setting (when measuring temperature)

•

Input coupling of the 701275 (ACCL/VOLT) (when a change is made between ACCL and

some other setting) and the sensitivity setting (when measuring acceleration)

•

FV and offset settings of the 701280 (FREQ)

•

Trigger setup conditions

•

A snapshot function that keeps the current displayed waveform on the screen is also

available. You can update the display without stopping waveform acquisition (see section

8.7).

•

For a description of the behavior when the Start Mode (Power On) is ON or OFF, see

appendix 8.

7.1 Starting/Stopping Waveform Acquisition

Содержание SL1400 ScopeCorder LITE














































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание SL1400 ScopeCorder LITE

Отзывы:

Похожие инструкции для SL1400 ScopeCorder LITE

Бренды по названию

Популярные бренды

YOKOGAWA SL1400 ScopeCorder LITE, Руководство пользователя

Результаты поиска

Содержание SL1400 ScopeCorder LITE

Отзывы:

Похожие инструкции для SL1400 ScopeCorder LITE

Бренды по названию

Популярные бренды