IM 701240-02E
Basic Key & Jog Shuttle Operations
This section describes key and job shuttle operations which are basic operations used to set the SL1400.
Basic Key Operations
Operations When a Setup Menu Is Displayed
Measurement Condition [ACQ] Menu
(Procedure to display the measurement condition menu: 1. Press MENU. 2. Press the ACQ soft key.)
Type in which the jog shuttle is used to set the value
(menu with or icon)
Press a soft key to set a menu under jog shuttle control
( : selected, : not selected).
Turn the jog shuttle to set the value. Press the arrow keys to change the
selected digit.
Type in which the item is selected from the displayed selections
The selected item switches each time the soft key is pressed.
The selected item is displayed highlighted.
Type in which a selection menu is displayed for selecting items
Press a soft key to display a selection menu.
Press the soft key corresponding to the displayed selection.
Setup menu
Soft keys
Type in which the jog shuttle is used to select items
(menu with or icon)
Press a soft key to set a menu under jog shuttle control
( : selected, : not selected).
Turn the jog shuttle to change the setting.
Operations When a Setup Dialog Box Is Displayed
Delay Setup Dialog Box
(Procedure to display the delay setup dialog box: 1. Press MEASURE. 2. Press the Delay Setup soft key.)
Turn the jog shuttle to select the item you want to set.
Press the SELECT key to display the selection menu.
Turn the jog shuttle to move the cursor to the item you want to set.
Press SELECT key to confirm.
Press the SELECT key to switch the selected item.
Press the SELECT key to display the value entry box.
Turn the jog shuttle to set the value.
Press SELECT key to confirm.
Value entry box
Selection menu
Setup dialog box
If Edge Count is selected
If delay mode [Mode]
is selected
Note
To clear a setup menu or a setup dialog box from the screen, press the ESC key.
Basic Key & Jog Shuttle Operations
Basic Key & Jog Shuttle Operations
