1-1
Names and Uses of Parts
IM 720120-01E
1
2
3
4
5
6
7
App
Index
1.1 Front Panel and Rear Panel
Front Panel
Handle
Cover panels for protecting
empty slots
Input module installation slots
LCD
Used to carry the SL1000.
→
Section 3.1
Attached to slots that are not used.
A total of 8 slots.
For the procedure to install or remove
input modules, see
section 3.3
.
External clock input
terminal
Used to apply an external
clock signal.
→
Section 5.1
Used to connect a PC with a
USB interface.
→
Section 4.1
USB connector for
connecting to a PC
Used to supply power (±12 V) to
a current probe.
For the probe connection
procedure, see
section 3.5
.
Used to connect the ground line of
the high-voltage differential probe
or enhance the grounding of the
measurement system. For the probe
connection procedure, see
section 3.5
.
Functional ground terminal
Probe compensation
signal output terminal
(1 kHz/1 Vp-p)
Outputs the probe compensation
signal.
For the probe compensation
procedure, see
section 3.6
.
Keys
Used to control the SL1000.
→
Section 1.2
Probe power supply
terminal
(option)
Functional ground terminal
Connect the ground cable when
compensating the probe.
→
Section 3.6
For a description of the indicated
information, see
section 1.3
.
Indicators
Displays the SL1000 status.
→
Section 1.2
PROBE POWER( 12 V DC )
EXT CLK IN
POWER
TRIG'D
HIGH-SPEED DATA ACQUISITION UNIT
SLOT
1
SLOT
2
3
SLOT
SLOT
4
5
SLOT
SLOT
6
7
SLOT
SLOT
8
START/
STOP
DISPLAY
Chapter 1
Names and Uses of Parts