YOKOGAWA ScopeCorder DL950, Руководство пользователя

Страница: 214 / 316

16-8
IM DL950-02EN
RMS Value (RMS)
The following screen appears when you select the rms function.
If the Calculation Period Is Edge
Select RMS.
Select the math source waveform.
Set the edge detection condition ( , , ).
Set the source waveform used to detect edges
(Own, CH1 to CH16,¹ RTmath1 to RTmath15²).
Set the hysteresis ( , , ).
Set the calculation period to Edge.
Set the level.
1 You can select channels in which input modules that support basic arithmetic are installed.
2 You can select channels whose numbers are smaller than the channel you are editing.
If the Calculation Period Is Time
Select RMS.
Select the math source waveform.
Set the hours.
Set the calculation period to Time.
Effective Power (Power)
The following screen appears when you select the effective power function.
Select Power.
Select the math source waveform.
Set the edge detection condition ( , , ).
Set the source waveform used to detect edges
(Own, CH1 to CH16,¹ RTmath1 to RTmath15²).
Set the hysteresis ( , , ).
Set the level.
Set the math range.
1 You can select channels in which input modules that support basic arithmetic are installed.
2 You can select channels whose numbers are smaller than the channel you are editing.
Effective Power Integration (Power Integ)
The following screen appears when you select the effective power integration function.
Select Power Integ.
Select the math source waveform.
Resets the integration result when waveform
acquisition starts
Resets the integration result when the
specified limit value is exceeded
Resets the integration result manually
Select the scale (Second, Hour).
Limit value used to reset the integration result
16.1 Configuring Real Time Math