manualshive.com logo in svg

YOKOGAWA ScopeCorder DL750, Руководство пользователя

Поделиться
Скачать
YOKOGAWA ScopeCorder DL750 Скачать руководство пользователя страница 222

16-11

IM 701210-06E

Ethernet Interface (Optional)

16

Note

•

An FTP server software must be running on the PC or workstation to which the DL750/
DL750P is to be connected.  In addition, the following points need attention regarding the
server program settings.

•

Set the list output (string returned by the dir command) to UNIX format.

•

Set the home directory and its subdirectories to allow writing.

•

The client cannot move above the home directory.

•

The newest file is not necessarily displayed at the top of the file list.

•

Files and directories that are longer than 17 characters cannot be accessed.

•

Depending on the server, “<..>” that indicates a higher directory may not be displayed.

•

The time information in the file list will not be displayed correctly for the following cases.
•

On Windows NT when the time stamp is displayed using am and pm.

•

Servers that return characters other than ASCII characters in the list

•

The following operations are not possible.
•

Turning file protect ON and OFF on saved files.

•

Formatting a network drive.

•

Copying between network drives.

•

Renaming a file on the network.

•

This function cannot be used when using the FTP server function or the Web server
function.

•

To use this function, you must configure TCP/IP according to the procedure given in
section 16.2.

•

To apply new settings that are made while connected to a network drive, drop the
connection using Disconnect and reconnect.

•

If you are disconnected by the server when using the FTP client, you will be automatically
reconnected if you perform a file operation.  This also hold true, if the network drive is
selected for Save to File when using an action trigger or GO/NO-GO.

Explanation

You can save the screen image data, waveform data, and setup data to network drives

via the Ethernet network in the same fashion as with the floppy disk drive, Zip disk drive,

and PC card drive.

If you wish to make the DL750/DL750P the FTP server and access the DL750/DL750P

from an FTP client on the network, see section 16.6.

FTP Server

Enter the IP address of the FTP server (the PC or workstation running the FTP server)

on the network to which waveform and setup data will be saved.  On networks

supporting DNS, you can specify the host and domain by name instead of the IP

address.

Login Name

Enter the login name using up to 15 characters.  The default setting is “anonymous.”

The characters that can be used are all the ASCII characters on the keyboard.

Password

Enter the password corresponding to the login name using up to 15 characters.

The characters that can be used are all the ASCII characters on the keyboard.

Time Out

When an FTP server is accessed from the DL750/DL750P and data is not transmitted for

a certain period of time (timeout time), the DL750/DL750P decides that the transmission

to the FTP server is not possible and closes the connection.  You can set the timeout

value in the range of 0 to 3600 s.  The default setting is 15 s.

16.3 Saving Screen Images, Waveforms, and Setup Data to a Network Drive (FTP Client Function)

Содержание ScopeCorder DL750























































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды