YOKOGAWA PX8000 Скачать руководство пользователя страница 118 | Manualshive

Страница: 118 / 202

YOKOGAWA PX8000 Скачать руководство пользователя страница 118

15-3

IM PX8000-02EN

15.3 Shifting the Phase

This section explains the following settings for shifting the phase:
• Computation
Function (Shift(S1)), computation source waveform, shift range, unit, label, turning the waveform

display on and off

• Scaling
• Computation start and end points

►

Features Guide: “Phase Shift (Shift (S1))”

“Record Length (Record Length)”

MATH Menu

Press

MATH

to display the following menu.

Set the computation.

Set the computation start and end points. ► section 15.1

Set Mode to ON.

Set the scaling. ► section 15.1

Configuring Computations (Math Setup)

1.

Press the

Math Setup

soft key.

2.

Press a soft key from

Math1

to

Math8

to display the following screen.

Select function Shift(S1).
Select the computation source waveform

(U1-U4, I1-I4, P1-P4, AUX3-AUX8, Math1-Math7).
Set the shift range

(within ±(record length/2) of the computation source waveform).

Turns the waveform display on and off

Set the label.

Set the unit.

«
...
116
117
118
119
120
...
»

Содержание PX8000











































































































































































































Отзывы:

Нет отзывов