YOKOGAWA PH72 Скачать руководство пользователя страница 30

Страница: 30 / 78

IM 12B03D02-01E

5-1

Keypad and Display Functions

5. Keypad and Display Functions

There are eight membrane keys on the keypad of the Model PH72 Personal pH

Meter. The following key functions are provided.

•  Displaying a pH (or mV) value and temperature
•  Displaying a pH (or mV) value, date and time
•  Holding a pH (or mV) value and temperature
•  Storing data — pH (or mV) value and associated information
•  Function mode
• Calibration

POWER

Auto Power Off

HOLD

F/ENT

MEAS

DATA

F050001.ai

CAL

Turns power on or off.

Automatic Power Off

function (default: 20 min).

Moves to calibration

mode.

Moves to measurement

mode or switches

measurement display

panels. Also exits from the

current function and returns

to measurement mode.

Changes setting or

value.

Moves to function

mode or confirms data

entry.

Holds the currently

measured value.

Stores the currently

measured value in

memory.

5.1 Keypad Functions

POWER

: Power On/Off key

Pressing and holding this key for at least one second when nothing is displayed on

the LCD, will turn the meter on. The meter will be turned off by pressing and holding

this key for at least two seconds when the meter is on. If no keys are pressed for a

preset time, the meter turns off power automatically (refer to Section 5.3 (8), “Set Auto

Power Off time (A.oFF) panel”).

CAL

: Calibration key

When pressed during measurement,

mark turns on and the meter moves to

calibration mode. To return to measurement mode, press

CAL

MEAS

key.

HOLD

: HOLD key

When pressed during measurement,

mark turns on and the currently

displayed measured pH (or mV) value and temperature are held. Pressing

HOLD

MEAS

key will turn

mark off and return the meter to measurement mode.

Содержание PH72















































































Результаты поиска

Содержание PH72

Отзывы:

Бренды по названию

Популярные бренды

YOKOGAWA PH72, Руководство пользователя

Результаты поиска

Содержание PH72

Отзывы:

Бренды по названию

Популярные бренды