manualshive.com logo in svg

YOKOGAWA PH71, Руководство пользователя

Поделиться
Скачать
YOKOGAWA PH71 Скачать руководство пользователя страница 10

IM 12B03D01-01E

1-3

1.  Outline

1.3  When You Receive the PH71 Meter Package

Confirm that you received all package components of the PH71 meter you ordered
referring to the Model and Suffix Code and the item list in Section 1.4,  “PH71 Meter
Kit.” Carefully inspect the meter and sensor, referring to Section 1.5,  “PH71 Meter —
Part Names and Functions” and Section 1.6,  “Sensors — Types, Part Names and
Functions.” Particular attention should be taken:

• Not to lose a wetting cap attached on the sensor tip. This cap is needed for

storage.

• Not to twist or pull the cable.

• Not to hit or drop the meter.

• Not to get connectors dirty.

• In handling of standard solutions and reagents. Solution bottles should be stored

in a cool, dark place and tightly capped after use. Once opened, the contents of a
bottle should be used early. Dispose of solutions in accordance with local
regulations.

Содержание PH71





































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды