2
IM 701923-01E
Component Names
Probe head
Cable
Probe interface
Add various
attachments, connect to
circuit under test
To digital oscilloscope input
Latch release lever
Output terminal
Cable
Probe head
Probe interface
Interface
spring pin
L-pins (2)
Lead wires
(one each in red and black)
Microclips
Straight pins
(8
)
Angle pins
(8)
Spring-type straight pins
(4)
Spring-type angle pins
(4)
Connect to
probe head
(one each in red and black)
The quantity in parentheses is the number of the various attachments
that come with a single probe.
Attachments
Variable resistor for adjusting offset voltage
Probe interface
Connects to a digital oscilloscope input.
Interface spring pins
When the probe output terminal is connected, these pins touch the pad on
the oscilloscope interface board. The probe’s power is supplied through these
interface pins. The interface pins are also used to supply a offset voltage and
used by the DL9000 to automatically detect the probe.
Cable
Connects the probe interface and the probe head.
Probe head
Connects to the circuit under test through various attachments.
Latch release lever
Releases the lock connecting the probe output terminal to the oscilloscope
input.
Attachments
The probe’s input terminals. You can select the probe head attachment that
you want to use on the circuit under measurement.
