manualshive.com logo in svg

YOKOGAWA MT300, Руководство по началу работы, Страница: 69 / 89

Поделиться
Скачать
YOKOGAWA MT300 Скачать руководство пользователя страница 69

5-12

IM MT300-02EN

5.8  Adjustment and Calibration

Adjustment

Contact your nearest YOKOGAWA dealer to have your instrument adjusted.
You can also make adjustments to the instrument. Have a qualified engineer adjust the instrument 
at a facility with sufficient precision. A manual explaining the adjustment procedure of the instrument 
is available for downloading from the following webpage. To download the information, you need to 
register.
http://www.yokogawa.com/jp-ymi/tm/Bu/MT300/

Calibration

We recommend that you calibrate the instrument once a year to check its accuracy. Contact your 
nearest YOKOGAWA dealer to have your instrument calibrated.

Calibrating the Pressure Measurement Function

The word calibration as used in this document refers to finding the relationship between the value 
indicated by the measuring instrument and that indicated by the standard.
This instrument is a high precision instrument. We recommend that you calibrate it once a year. 
When calibrating, you need to carefully consider the pressure standard to use and the measurement 
environment.
Use a pressure standard with a clear traceability to national standards and an accuracy better than ± 
0.01%.
If you are using a pressure balance as a standard, carefully consider matters regarding the use of a 
pressure balance (corrections for gravity at the measurement point, mass of the weight, buoyancy in 
air, and the like, temperature coefficient, measurement temperature, etc.), and calibrate by applying 
accurate pressure.
YOKOGAWA performs accurate calibration according to your request. We recommend that you ask 
your nearest YOKOGAWA dealer to have your instrument calibrated.

Содержание MT300


























































































Отзывы:

Нет отзывов