YOKOGAWA HANDY CAL CA51, Руководство пользователя

Страница: 66 / 108

IM CA71-E
6-5
Memory Functions
6
NOTE
• To stop overwriting the data, press the key one time. This cancels sav-
ing data, reverting to the original state of being able to save/read data to/
from memory.
TIP
To cancel the memory mode (saving/reading), press the key one more time.
(Executing the MEM SAVE function automatically cancels the memory mode.)
6.2 Reading Data from Memory
Step 1: Press the key once. The LCD shows MEM No. xx. At this
point, the MEM No. indicator shows a memory number imme-
diately following the one most recently used to save data.
(Memory is ready for data saving.)
Step 2: Pressing the key causes the on-screen indication
to blink, indicating the calibrator is reading from memory.
Step 3: Using the pair of key, select the memory number
whose data you want to read. The LCD shows the data thus
read out of memory. The items of the read data are shown on
their respective measured-value and generated-value display
areas. If the area with the memory number contains no saved
data, the LCD shows - - - - -.
TIP
• To cancel reading from the memory mode, press the key or the key
one more time.
• To save data anew while reading from memory, overwrite the existing data by
following step 2 in subsection 6.1.3, "Overwriting Data in Memory."
6.1 Saving Data into Memory