YOKOGAWA HANDY CAL CA51, Руководство пользователя

Страница: 31 / 108

4-2
IM CA71-E
4.1 Connecting Cables to Terminals
4.1 Connecting Cables to Terminals
For DC voltage, DC current, thermocouple or pulse output
Step 1: Connect the red lead cable for source (P/N: 98020) to the H
output terminal and the black lead cable to the L output termi-
nal.
Step 2: Connect the two clips of the cables to the input of equipment
under test while making sure the polarities are correct.
For 3-wire connection resistance or RTD signal
Step 1: Connect the red lead cable for source (P/N: 98020) to the H
output terminal, and both black lead cables to the L output
terminal. (The two black lead cables should be fastened to-
gether to the L output terminals.)
Step 2: Connect the three leading clips of the cables to the input of
equipment under test while making sure the polarities are cor-
rect.