YOKOGAWA GS820 Скачать руководство пользователя страница 165

Страница: 165 / 286

11.7 Error Log Display

Procedure

Error Log Display

Press

ERROR

to display the error log screen.

Error message or

confirmation message

Clearing the Error Log Display

Press the

Clear

soft key to clear the error log.

Explanation

The ERROR key illuminates if an error such as a runtime error or communication

command error is stored in the error memory.

The error log displays error messages and confirmation messages. An error message

has an associated error number, and a confirmation message does not.

A confirmation message is displayed in the error log until the problem indicated by the

message is resolved. It is not cleared even if the Clear soft key is pressed.

For the meaning and corrective action of messages, see section 17.2, “Error Code

Descriptions and Corrective Actions.”

Note

• The error memory is also cleared if the error is read using a communication command

“

:SYSTem:ERRor?

” or if the GS820 is turned OFF. You can also clear the error memory by

sending the “

*CLS

” communication command.

• If the error memory becomes full, “

−

350 : Queue overflow

” is entered as the last error

indicating that any addition errors will be discarded. If the error memory is cleared, the

ERROR key turns OFF.

<<Corresponding Command Mnemonic>>

:SYSTem:ERRor?

*CLS

11-8

IM 765601-01E

Содержание GS820































































































































































































































































































Результаты поиска

Содержание GS820

Отзывы:

Бренды по названию

Популярные бренды

YOKOGAWA GS820, Руководство пользователя

Результаты поиска

Содержание GS820

Отзывы:

Бренды по названию

Популярные бренды