YOKOGAWA FG420, Руководство пользователя

Страница: 141 / 180

127 IM FG410-01EN
b) Restoring the saved contents to the initial settings
Similarly to the saving operation, after
setting the setting memory number,
press the [Clear] soft key. This opens
the dialog box for checking the
initialization operation.
To perform initialization, select [OK] and
then press the
ENTER
ENTER key. This
causes the setting contents previously
saved to that setting memory number
to be overwritten with the initial setting
contents.
c) Changing the setting memory name
1.
Similarly to the saving operation, after
setting the setting memory number,
press the [Rename] soft key to open
the setting memory name input field.
2.
Select the digit to be changed with the left/right arrow keys , and change the
character with the up/down arrow keys or the modify knob. Uppercase and
lowercase alphabetic characters, numbers, and symbols can be input. Numeric values
can be directly input by using the
0 ... 9 numeric keypad.
Press the [Delete] soft key to delete the character at the cursor position. The character
string to the right of the cursor moves one place left.
Press the [Insert] soft key to insert a space at the cursor position.
Press the [CLR ] soft key to delete the character string to the right of the cursor
position (cursor position not included).
Press the [Clear] soft key to delete all the characters
The name may consist of up to 20 characters.
3.
Press the [Apply] soft key or the
ENTER
ENTER key to fix the changed name and close
the setting memory name input field.
When the
CANCEL
CANCEL key is pressed here, the name remains unchanged and the
setting memory name input field closes.
The setting memory name can also be changed on the Recall Memory screen.
Check
The following characters can be used for the setting memory name.
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z
a b c d e f g h i j k l m n o p q r s t u v w x y z
0 1 2 3 4 5 6 7 8 9
! # $ % & ’ ( ) * + , - . / : ; < = > ? @ [ ] \ ^ _ ` { | } ~ space
Press the [Clear]
soft key to open
the dialog box for
checking the
initialization
operation.
Select [OK] and
then press the
ENTER key to
restore the initial
setting.
Press the
[Rename] soft key
to open the setting
memory name
input field.
5.1 Saving Settings