YOKOGAWA F3XS04-3N, Инструкция по эксплуатации

Страница: 28 / 66

4-4
<Toc> <Ind> <4. Module Access >
IM 34M6H54-01E
4.1.3 Writing Data (WRITE/HWR)
Use the special module write instruction and special module high-speed write instruction
for writing data to the pulse input module.
SEE ALSO
Refer to the following instruction manual for details on the special module write instruction and special
module high-speed write instruction.
Sequence CPU Instruction Manual — Instructions (IM 34M6P12-03E)
Table 4.3 Special Module Write/High-speed Write Instruction
WRITE
FUN
No.
Special
module
write
Instruction Mnemonic Symbol
Necessary
Not
necessary
Input condition
Execution
condition
Step
count
Processing
unit
Carry
82 WRITE 5
WRITE
S82P
↑
WRITE 6
●
— 16 bits —
HWR
Special
module
high-speed
write
84 HWR 5
HWR
84P
↑
HWR 6
●
— 16 bits —
T0403.EPS
• Symbols
First data position number for writing ... Data position number from which to start writing (Table 4.1)
Transfer data count ... Number of data to be written
k S SL n2 WRITE
Physical slot position (1 to 13) where the analog input/output module is installed
Unit number
Main unit: 0
Sub-unit: 1 to 7 (for sequence CPU)
X XX
k S SL n2 HWR
S: First device number for writing data
SL: Slot number
n2: First data position number for writing
k:
Transfer data count
Starting device number for writing data ... For the device which can be used, please refer to the Sequence CPU
Instruction Manual — Instructions (IM 34M6P12-03E).
Slot number ... 3-digit integer with the following configuration (leading 0’s can be omitted):
FC040103.EPS
CAUTION
The special module long-word write instruction cannot be used. The operation is not guar-
anteed if this instruction is used to write data from the pulse input module.
1st Edition : Feb.01,1999-00